gcwait2007
04-25 11:31 AM
hello folks,
I am switching jobs after an approved I140 and over 180 days from 485 receipt.
I am expecting no problems when leaving my current company. but just incase they decide to revoke my 140,
- is it ok to file AC21 after i receive the NOID if some thing happens or is it better to file AC21 now?
one other complication is i will be changing address too. how long does it take for USCIS to update my new address in their records? the reason i am asking is if they send me RFE or NOID, i will totally miss the boat if they send it to the wrong address. i am sure they will send a copy to my attorney, but he works form my current employer and I will assume he is less likely to help. Does it help if i file G28 with my own name and my new address?
I need to join my new job in 10 days and i hev give my crrent company a notice so it is a bit urgent. Please help.
Thank you
Rex
I have not yet used AC21 to port my job and I am still with my GC sponsoring employer. However I can share my knowledge gained thru various threads in IV and other forums.
If the current GC sponsoring employer decide to revoke the approved I-140, then he/ his lawyer should notify you their intention as well. When they send the letter to USCIS, a copy of the same will be sent to you. There are chances that you may not receive this letter.
If I were you, I would do the following:
Step 1: I would notify the change in address to USCIS. (AR-11 form electronically) and watch out for LUDs.
Step 2: After settling down in new job atleast for few days (one month minimum), I would notify the USCIS about my using AC21 portability for changing the job. There are appropriate formats for notifying USCIS, which you can find in this forum. In case, NOID is issued in future, then the early advice of AC21 would come in handy. I have heard the successful stories where the individuals had sent AC21 intimation earlier.
All the best in your new job! Good Luck
I am switching jobs after an approved I140 and over 180 days from 485 receipt.
I am expecting no problems when leaving my current company. but just incase they decide to revoke my 140,
- is it ok to file AC21 after i receive the NOID if some thing happens or is it better to file AC21 now?
one other complication is i will be changing address too. how long does it take for USCIS to update my new address in their records? the reason i am asking is if they send me RFE or NOID, i will totally miss the boat if they send it to the wrong address. i am sure they will send a copy to my attorney, but he works form my current employer and I will assume he is less likely to help. Does it help if i file G28 with my own name and my new address?
I need to join my new job in 10 days and i hev give my crrent company a notice so it is a bit urgent. Please help.
Thank you
Rex
I have not yet used AC21 to port my job and I am still with my GC sponsoring employer. However I can share my knowledge gained thru various threads in IV and other forums.
If the current GC sponsoring employer decide to revoke the approved I-140, then he/ his lawyer should notify you their intention as well. When they send the letter to USCIS, a copy of the same will be sent to you. There are chances that you may not receive this letter.
If I were you, I would do the following:
Step 1: I would notify the change in address to USCIS. (AR-11 form electronically) and watch out for LUDs.
Step 2: After settling down in new job atleast for few days (one month minimum), I would notify the USCIS about my using AC21 portability for changing the job. There are appropriate formats for notifying USCIS, which you can find in this forum. In case, NOID is issued in future, then the early advice of AC21 would come in handy. I have heard the successful stories where the individuals had sent AC21 intimation earlier.
All the best in your new job! Good Luck
wallpaper Justin Bieber and Selena Gomez
thomachan72
05-10 09:42 AM
I am curious to know if people are sending amounts >20K by wire transfer to India or other countries from the US. People who do that regularly or have done that in past, have you encountered any problems? Wire transfers are directly informed by the bank to the IRS and you do not have to do it personally right?
Comments from those who have done this before is appreciated.
Comments from those who have done this before is appreciated.
desi3933
07-20 04:53 PM
I and my spouse both have green card. We have a kid who was born in INDIA. He has not visited USA till now. The kid is about 2 years.
We are planning to bring the kid by end of this year to USA.
So what visa should we apply for him we are not sure :confused:
A friend told that he had a baby born to him in india and came to usa with in the 1st 6 month to USA and since both parents were having green card, at port of entry in USA, the kid also got greencard for 5 years this was couple of years back.
But in my case, the kid is 2 years AND also not sure what is the procedure now. Is it still true by default the kids automatically gets the green card at port of entry (Is there any age limit I hope may be till < 13 yrs) if parents posses valid green card. Please help me in this situation.
Thanks in advance, ;)
Suject to certain conditions, children born abroad to permanent resident mothers are permanent residents. The requirements are that such a child must be brought to the U.S. on the mother's first return trip, and this trip must occur before the child is two years of age. I think, the child in this situation does not need a visa. Please check with your lawyer.
The necessary paperwork is processed at the port of entry, based on the mother's permanent resident status and birth certificate for the child.
____________________
Not a legal advice.
We are planning to bring the kid by end of this year to USA.
So what visa should we apply for him we are not sure :confused:
A friend told that he had a baby born to him in india and came to usa with in the 1st 6 month to USA and since both parents were having green card, at port of entry in USA, the kid also got greencard for 5 years this was couple of years back.
But in my case, the kid is 2 years AND also not sure what is the procedure now. Is it still true by default the kids automatically gets the green card at port of entry (Is there any age limit I hope may be till < 13 yrs) if parents posses valid green card. Please help me in this situation.
Thanks in advance, ;)
Suject to certain conditions, children born abroad to permanent resident mothers are permanent residents. The requirements are that such a child must be brought to the U.S. on the mother's first return trip, and this trip must occur before the child is two years of age. I think, the child in this situation does not need a visa. Please check with your lawyer.
The necessary paperwork is processed at the port of entry, based on the mother's permanent resident status and birth certificate for the child.
____________________
Not a legal advice.
2011 justin-ieber-selena-gomez-
hebbar77
09-20 10:03 PM
Atleast we see the green card at a distant horizon. People who want to start with PERM now are told by a lawyer that it might take a year for PERM alone, and upto 8 years before they see the CARRRRRD.
I just got my EAD. I will assume its my GC.
I just got my EAD. I will assume its my GC.
more...
martinvisalaw
07-13 05:26 PM
You shouldn't need an experience letter to apply for a H-1B visa, especially when the visa is for a different company. Eligibility for H-1B status doesn't depend on experience, it is education that is important.
pappu
08-20 05:08 PM
Thank you everyone for taking appointments. We are getting good feedback from the recent visits. Please continue this effort.
more...
paskal
06-11 11:59 AM
what exactly is your question?
there are no versions. the official text of the new proposal is on the main page and iv's official position is clearly posted too:
http://immigrationvoice.org/media/forums/Immigration_Voice_position_on_Draft_S1348.pdf
there have been amendments since, most of which are nothing to do with us barring (dis)honorable exceptions like senator sanders' money grabbing scheme.
there are no versions. the official text of the new proposal is on the main page and iv's official position is clearly posted too:
http://immigrationvoice.org/media/forums/Immigration_Voice_position_on_Draft_S1348.pdf
there have been amendments since, most of which are nothing to do with us barring (dis)honorable exceptions like senator sanders' money grabbing scheme.
2010 Selena Gomez Wants To Fall In
MerciesOfInjustices
02-22 09:59 PM
Pardon my ignorance, but what is PBEC exactly and what are the issues regarding it? Something to do with Labor backlogs?
more...
cox
November 26th, 2005, 11:15 AM
My primary tip is patience... By very early, I mean at or just after sunrise... Early's no problem, I don't sleep anyway. :p I'll work on my patience ;)
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks... I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem... It doesn't always work, but it does so often enough that it's worth hauling the sticks around... I remember Don's bamboo stick tip now that you remind me. I'll go to the nursury today...
These days I make heavy use of my 5-in-1 disk for diffusion and reflection... but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it... Kevin's suggestion of using a quality reflector is a good idea, I'll go the camera store after the nursury...
As for shooting technique, a tripod is a must... and hang the camera upside down... and frequently use mirror lock up... GaryI use a manfrotto 3001BPRO tripod, which allows you to put the camera all the way onto the ground, and even position the center column horizontally, but I use a pan-tilt head that's not too flexible (and I bent it the other day :(). I'll look at ball heads while I'm at the camera store... I never thought of hanging the camera upside down! I'll try that. Great tip. I use mirror lock-up when shooting thru my telescope, but forgot to use it here. Will do.
Hope all of this rambling helps... Gary
Thanks for the feedback, Gary, I really appreciate it.
I've also had great success with a trick Don Bevis shared. You can get thin bamboo sticks... I always carry two of them with me and stick them in the ground so that they apply slight pressure to the plant stem... It doesn't always work, but it does so often enough that it's worth hauling the sticks around... I remember Don's bamboo stick tip now that you remind me. I'll go to the nursury today...
These days I make heavy use of my 5-in-1 disk for diffusion and reflection... but Kevin Sadler talked me into spending more money to get a quality product and I haven't regretted it... Kevin's suggestion of using a quality reflector is a good idea, I'll go the camera store after the nursury...
As for shooting technique, a tripod is a must... and hang the camera upside down... and frequently use mirror lock up... GaryI use a manfrotto 3001BPRO tripod, which allows you to put the camera all the way onto the ground, and even position the center column horizontally, but I use a pan-tilt head that's not too flexible (and I bent it the other day :(). I'll look at ball heads while I'm at the camera store... I never thought of hanging the camera upside down! I'll try that. Great tip. I use mirror lock-up when shooting thru my telescope, but forgot to use it here. Will do.
Hope all of this rambling helps... Gary
Thanks for the feedback, Gary, I really appreciate it.
hair selena gomez kissing justin
onemorecame
06-25 04:18 PM
They will process applications based on receipt date. But approval will happen only if your PD is current. That means if
CASE A with PD 2003
CASE B with PD 2005
CASE C with PD 2007
Say all file in July and if dates gets retrogess some time in OCT or before to 2006.
Say for CASE A and CASE C all process is done( name check,... every thing but not approval) and CASE B is stuck in name check.
then CASE A will be approved because A process is complete and PD is current
CASE B will be pending waiting to clear name check though the PD is current
Once name check done and PD is current this will approve.
CASE C will not be approved though processing is complete PD is not current
once PD become current CASE C will approve.
This is just example to explain how it works.
Thanks samrat_bhargava_vihari
for this nice example to clear the things
CASE A with PD 2003
CASE B with PD 2005
CASE C with PD 2007
Say all file in July and if dates gets retrogess some time in OCT or before to 2006.
Say for CASE A and CASE C all process is done( name check,... every thing but not approval) and CASE B is stuck in name check.
then CASE A will be approved because A process is complete and PD is current
CASE B will be pending waiting to clear name check though the PD is current
Once name check done and PD is current this will approve.
CASE C will not be approved though processing is complete PD is not current
once PD become current CASE C will approve.
This is just example to explain how it works.
Thanks samrat_bhargava_vihari
for this nice example to clear the things
more...
AgentM
01-25 10:15 PM
Hi,
If anybody has used a lawyer for AC21, please post the lawyer details and their cost.
Thank you.
If anybody has used a lawyer for AC21, please post the lawyer details and their cost.
Thank you.
hot Selena Gomez, Justin Bieber
pardesh
02-01 08:59 PM
I recently entered the US using AP, basically she would be abandoning her F1 as soon as she enters using her AP. Her status changes from International Student to Pending Immigrant (or something similar). BTW carry at least two original copies of AP. Even if she plans to work on EAD at school or later after graduation, it just makes sense to enter using her AP (think..).
more...
house justin bieber and selena gomez kissing at the billboard awards 2011. justin
illusions
04-21 02:42 PM
I got the Card Production Ordered e-mail today. No LUD even last night at 1 Am. Only one LUD today. My case is processed at Texas service center. And my receipt date is not with in their processing times.
Good luck to everyone.
Congrats on your approval. I have seen many approvals where the processing time doesn't match and i'm not sure if it's the case that they don't update it or they just process it randomly once the PD becomes current - anybody's guess i would think.
Good luck to everyone.
Congrats on your approval. I have seen many approvals where the processing time doesn't match and i'm not sure if it's the case that they don't update it or they just process it randomly once the PD becomes current - anybody's guess i would think.
tattoo selena gomez bikini and justin
ImmiLosers
09-26 12:22 AM
1)Incase my 485 application gets denied, can I start the process again and use the PD of my current application?
2) Can I move to and start the GC process with another company and use the current PD (I140 approved, 180 days passed), even if my current company revokes I140 and my Job description is very different --- I'm assuming yes.
3) What if I leave the country and come back after 2-3 years and reapply. Can I reuse the PD of my current application?
I was told by a friend that the priority date is mine forever since my I140 is approved. Is that correct?
Thanks
YES YES YES - go ahead screw your smalltime employer
2) Can I move to and start the GC process with another company and use the current PD (I140 approved, 180 days passed), even if my current company revokes I140 and my Job description is very different --- I'm assuming yes.
3) What if I leave the country and come back after 2-3 years and reapply. Can I reuse the PD of my current application?
I was told by a friend that the priority date is mine forever since my I140 is approved. Is that correct?
Thanks
YES YES YES - go ahead screw your smalltime employer
more...
pictures Justin Bieber And Selena Gomez
nixstor
08-23 11:01 AM
pani_6,
While I am with you on the outburst, I want to underscore that GC is not a panacea for all problems in life. C mon, There is more to life than GC. Yes, your Masters Degree will pay you in the long run. No need to worry about it. Keep the GC thing on the back burner and see what you can do meanwhile (PMP,GMAT etc..)
While I am with you on the outburst, I want to underscore that GC is not a panacea for all problems in life. C mon, There is more to life than GC. Yes, your Masters Degree will pay you in the long run. No need to worry about it. Keep the GC thing on the back burner and see what you can do meanwhile (PMP,GMAT etc..)
dresses Justin Bieber amp; Selena Gomez
nomorelogins
11-08 06:10 PM
check page 114 ( 132/145 ) of http://www.dhs.gov/xlibrary/assets/CISOMB_Annual_Report_2007.pdf
more...
makeup pictures justin bieber selena
Pawankalyan
11-16 12:21 PM
Don't worry about processing dates..
In a brief all centers will move 1 month forward and NSB with move 15 day forward....
The good thing regarding the processing date is we don't have retrogation..
In a brief all centers will move 1 month forward and NSB with move 15 day forward....
The good thing regarding the processing date is we don't have retrogation..
girlfriend selena gomez dating justin
paskal
08-05 11:51 PM
the number 75K by 7/27 came from USCIS not Pederson
hairstyles Justin Bieber y Selena Gomez
thediablo
05-30 04:59 PM
bah dont get sad... i know you can do it worst than that :D
:thumb:
:thumb:
Anogar
03-05 02:12 AM
I think I misread the OP about moving from the flash IDE to flex builder although I strongly prefer both FD and FDT to flex builder..
and no Jeff, it wasn't directed at you although I'm sure you have no idea what you're talking about either :P
You didn't misread it, he said:
I think it's natural to switch from Flash Studio to Flex Builder in the some point of time.
Never mind...
And I also disagree. Flex has some strong points, but ultimately there isn't much you can't accomplish with Flex that you couldn't have done with Flash + Flash Develop, or FDT, or something like that. Obviously no one uses the Flash IDE to code once they reach a certain point, but that doesn't mean the only (or best) option is to move to Flex Builder. I find Flex Builder to be sort of cumbersome, and for working with artists, which I'm always doing, I much prefer using the Flash IDE.
and no Jeff, it wasn't directed at you although I'm sure you have no idea what you're talking about either :P
You didn't misread it, he said:
I think it's natural to switch from Flash Studio to Flex Builder in the some point of time.
Never mind...
And I also disagree. Flex has some strong points, but ultimately there isn't much you can't accomplish with Flex that you couldn't have done with Flash + Flash Develop, or FDT, or something like that. Obviously no one uses the Flash IDE to code once they reach a certain point, but that doesn't mean the only (or best) option is to move to Flex Builder. I find Flex Builder to be sort of cumbersome, and for working with artists, which I'm always doing, I much prefer using the Flash IDE.
pmpforgc
02-26 12:05 PM
hi
Just wanted to know if some one like me who have masters or more (phD) in Engineering and have backgorund in bioprocessing or food processing as well as research and academics . What may be the best IT options.
Reason I am asking is with current PhD and Academic jobs it is lot less pay (say in around 50 K). So wanted to explore other option if some how get laid off or fired one day which may be comming soon in a year or so.
though I had not done any programmming any day, I did little bit in my bachelors and at that time I thought I can do it well. But than really never had chance to work on programming stuff, as worked more with applied engineering in bio and food area.
thanks for input.
Just wanted to know if some one like me who have masters or more (phD) in Engineering and have backgorund in bioprocessing or food processing as well as research and academics . What may be the best IT options.
Reason I am asking is with current PhD and Academic jobs it is lot less pay (say in around 50 K). So wanted to explore other option if some how get laid off or fired one day which may be comming soon in a year or so.
though I had not done any programmming any day, I did little bit in my bachelors and at that time I thought I can do it well. But than really never had chance to work on programming stuff, as worked more with applied engineering in bio and food area.
thanks for input.
No comments:
Post a Comment